How Much Does It Cost To Install A Mini Split At Home Depot?
Installing a mini-split for your house is not an easy job because it requires many skills and techniques. That is the reason why we need an available in-home installation service. Home Depot is a home improvement retailer not only sell their products but also offers customers this installation service. So, Home Depot might be one of your choices for mini-split installation. But now, if you are not sure about your decision, this article is designed for you. We provide you with all information about the Home depot mini-split installation service and its cost right below!
What Is Mini Split?
The air-handling unit inside your home and the condenser unit outside your home are the two main components of a mini-split (ductless) system. The term "mini" refers to the size, as most units are sleek and compact in design, allowing you to place the indoor unit anywhere on your wall or ceiling.
Mini-split systems are designed to use the least amount of energy while maintaining comfort. The compressors quietly ramp up or down based on the needs of each room, detecting and adjusting as needed. Because they are ductless, this results in increased comfort, energy conservation, and a lower noise level. Mini-split is an affordable choice for many households and is a more energy-efficient system than traditional heating and cooling units.
How To Start Home Depot’s Mini-Split Installation
Firstly, Home Depot offers customers a free in-home consultation, so you should check whether this service is available in your area or not. A representative from one of our local service providers will contact you to schedule your consultation for a convenient day and time. Home Depot's comprehensive installation service includes the cost of your mini-split. Your service provider will work with you to determine the best mini-split system for your budget, home, and requirements.
When you're ready to proceed, you'll buy your mini-split along with the installation service, and they'll set up your appointment for a convenient date and time.
How Home Depot Installs Your Mini-Split
Step 1: Choose your favorite mini-split system that works for your spaces:
- Single-zone ductless mini splits: the smallest, simplest system to install. These are intended to heat or cool a single room, such as a kitchen, bedroom, addition, attic, or garage. Each unit has a single air handler and condenser unit.
- Dual-zone ductless mini splits: These mini-split units are designed to heat or cool two areas or multiple rooms and are powered by a single condenser unit.
- Multi-zone ductless mini splits: the most complicated system to install. Multi-zone mini splits are designed to heat or cool separate areas and have a condenser unit that can accommodate multiple air handlers.
You'll also need to figure out what size micro split is right for your space. So, take a measurement of your room and calculate the square footage.
Step 2: Install Interior Part Of Mini-Split:
- Choose an exterior-facing wall in the room to be heated and/or cooled.
- Find the studs. It's ideal to mount the plate directly to the studs, but keep in mind that you'll need to drill a sizable hole through the wall to the outside (about 3-inches).
- Place your wall unit on the bracket that was meant to hold it in place. Make sure the bracket is properly aligned with the help of a level.
- Drill holes in the wall as needed.
- The control wire should be connected to your indoor unit.
- Fold the refrigerant pipe so that it can be pushed through the hole you have created in the wall.
- Lift your indoor unit to the mounting bracket and feed the bundled pipes, cable, and tubing through the hole.
Step 3: Install Exterior Part Of Mini-Split:
- Decide where you want your outdoor unit to go.
- If you're installing lines from a DIY kit that are already pre-charged, connect the pipes and tubing from your inside unit to the outside unit.
- To keep the wires and tubing in place, attach them to the outer wall.
- Connect the suitable pipe joint to the back of your outdoor unit's line set. Then, from the interior unit to the outside unit, connect the multi-conductor wiring.
Factors That Impacts Mini-Split Installation Cost
The cost of a mini-split air conditioner depends on its size, kind, brand, number of zones, modifications, electrical work, and labor difficulty.
- Location: Additional wiring, conduit, and refrigerant lines are required for installations on the second or third floors. For refrigerant lines longer than 25 feet or lines running through crawl spaces pr attics, labor, and material expense double.
- Permits: The cost of obtaining a permit for ductless air conditioning installation ranges from $250 to $400 on average, with restrictions varying by the municipality
- Climate: Extremely cold areas necessitate a mini-split system capable of operating in temperatures below zero degrees Fahrenheit.
- Season: During the off-peak seasons of January to March and September to November, several HVAC firms offer installation savings
- Accessibility: difficult-to-reach regions or siding projects raise labor expenses and may necessitate extra supplies.
- Warranty: major brands need installation by a licensed HVAC contractor.
In case you want to install the mini-split on your own, this video is helpful for you to some extends.
In brief, mini-split installation at Home Depot ranges from $500 to $2,000, depending on the number of zones and complexity. This work is outsourced to a network of local installers by Home Depot. These HVAC technicians are licensed, insured, and have passed a background check. Don’t forget you can use all available coupons and discount codes from Home Depot at FindCouponHere. Thank you for reading!